E-Body Hole Locations (Firewall, Door, Interior, ect)

[cataclysm80]

On 1970 cars, the side glass weatherstripping attaches with clips that fit into oval holes.
On later years, the side glass weatherstripping attached with screws in simple round holes.

[cataclysm80]

Looking down into the quarter window area.

[cataclysm80]

....

[cataclysm80]

.....

[cataclysm80]

Rear Seat
Seat Belts
Dual Exhaust Bracket
Body Plugs
And the wiring clips which hold the wiring for Power Windows, Defogger, & Rear Speakers.

[cataclysm80]

......

[cataclysm80]

Console shifted automatic transmission pictured
Console shifted manual transmission will be different
Column shifted automatic transmission will be different

[cataclysm80]

.......

[cataclysm80]

The trunk lid torsion rods can be set to a different position, depending on how heavy of an item you have mounted to the trunk lid.
Nothing
Luggage Rack
Wing Spoiler
Trans Am Spoiler

[cataclysm80]

.......

[cataclysm80]

Early 1970 trunk lids have provisions for a luggage rack, but not for any spoilers.
The Go Wing became available around January, and the trunk lids changed to have provisions for mounting it.
The Trans Am spoiler became available around March, and the trunk lid changed again.

The pictured trunk lid is an early trunk lid, but the cutouts for the T/A spoiler have been added.

[cataclysm80]

The hood bumpers located in the rear corners of the hood are small round rubber bumpers attached with a single screw.
They are very hard to find.

[cataclysm80]

Time for bed, I'll have to post more later.

[Cuda Cody]

@cataclysm80  you are amazing!!!!     Fantastic job labeling everything.   

[Cuda Cody]

Yes, that is the Brake Proportioning mounting holes above the splash shield.   

Looks like I could use some assistance with a few labels in this picture also.

It's probably Manual Transmission stuff (need item names), and maybe a Brake Proportioning Valve?

In later years, the inner fender was reshaped to accommodate a different battery hold down design.