Main Menu

Steering column conversion

Started by Ramcharger32348, July 02, 2017, 09:20:48 AM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

Ramcharger32348

I have a 72 Barracuda with a column shift automatic.  I want to move to floor shift.  What do I need to make the column look right?  Do I leave the shifter tube alone and cut off unneaded lever in engine compartment.  I am shortening the shaft for a PS box conversion  thanks

Cuda Cody

The shaft is collapsible because it's designed to telescope in an accident.  But you can collapse it and then re-glue it so it's the length of a PS shaft. 

As for the switch from column shift to floor shift, really the only thing you need is the set of collars.  @TONY  sells the collars and has both 1970 and the 1971-1974 available.

http://www.tonysparts.com/newproductsE.htm

1971 and up should not have a lockout tube so you should be good to go with those parts.  While you're in there be sure to check if the turn signal switch is working.  Easy to replace if you're already in there.

Ramcharger32348

Thanks for the feedback.  I watched your videos last night and found them very informative.  May have to watch them again can't remember what I had for lunch. 


Ramcharger32348

you show what seems to be 3 sections.  My column has 2.  All Ebay listings show 2 parts.  Am I missing something?

Cuda Cody

@Ramcharger32348   do you have a photo of what you have now?  Just want to make sure it's an E-Body and what year it is.

Yes, you need the complete set of three if you are replacing a column shift.


Quote from: Ramcharger32348 on July 03, 2017, 08:42:34 AM
you show what seems to be 3 sections.  My column has 2.  All Ebay listings show 2 parts.  Am I missing something?

Ramcharger32348

My column looks like the green one cant see gear indicator on black on although looks same.  I have trouble sending pics.  Lucky can even use this forum lol.  My tech is cars not computors or smart phones.  But I am sure it is a 72 Barracuda.  It's all original  thanks

Lilian

why do people cut column shift column when I am looking for one for monthes ..... too bad I am in France, maybe I will fly to buy one lol !!

and I have 2 floor shift column here ..... non with the correct inner tube and bracket !!  :pullinghair: :pullinghair:


1 Wild R/T

Quote from: Ramcharger32348 on July 05, 2017, 08:15:24 AM
My column looks like the green one cant see gear indicator on black on although looks same.  I have trouble sending pics.  Lucky can even use this forum lol.  My tech is cars not computors or smart phones.  But I am sure it is a 72 Barracuda.  It's all original  thanks
.