1971 Cuda Hellcat - Chiquita

71Cuda · December 06, 2018, 06:31:08 PM

Quote from: Hellfish on December 06, 2018, 06:28:50 PM
Well I'm almost done with my build staring on electrical and Ac next week engine and trans fits like a glove

What trans are you using?

Have you run into any issues with anything so far, what were they and how did you overcome them?

Sent from my iPhone using Tapatalk Pro

71Cuda · December 07, 2018, 09:05:41 PM

Her front feet are on the ground. The back is still on jacks. I'm completing the fuel system at the tank and then the heater cooling lines.

Sent from my iPhone using Tapatalk Pro

71Cuda · December 07, 2018, 09:07:25 PM

Sent from my iPhone using Tapatalk Pro

Cuda Cody · December 07, 2018, 09:36:08 PM

Keep up the great work!

71Cuda · December 07, 2018, 10:18:33 PM

Quote from: Cuda Cody on December 07, 2018, 09:36:08 PM
Keep up the great work!

Thank you for the kind words, I really enjoy each build.

Sent from my iPhone using Tapatalk Pro

YellowThumper · December 08, 2018, 01:42:45 PM

This is a great build to follow and dream on.

GoodysGotaCuda · December 08, 2018, 05:42:06 PM

Quote from: 71Cuda on August 07, 2018, 07:57:58 PM
Some
Rear end pictures to share

Sent from my iPhone using Tapatalk Pro

Aren't all Wilwood calipers 3/8" NPT? There's no flare inside of the caliper for your tubing flare to seal on and the tube nut threads are straight, not tapered.

Sorry, but unless these are different than my Wilwoods, that's not going to seal...

Sent from my iPhone using Tapatalk

71Cuda · December 08, 2018, 05:47:48 PM

Quote from: GoodysGotaCuda on December 08, 2018, 05:42:06 PM
Quote from: 71Cuda on August 07, 2018, 07:57:58 PM
Some
Rear end pictures to share

Sent from my iPhone using Tapatalk Pro

Aren't all Wilwood calipers 3/8" NPT? There's no flare inside of the caliper for your tubing flare to seal on and the tube nut threads are straight, not tapered.

Sorry, but unless these are different than my Wilwoods, that's not going to seal...

Sent from my iPhone using Tapatalk

Each caliper has a npt to flare fitting. We are good

Sent from my iPhone using Tapatalk Pro

Convertcuda · December 08, 2018, 06:39:04 PM

Thank you for taking the time to take pictures. What type of exhaust are you going to put on car?

Ken

71Cuda · December 08, 2018, 07:37:37 PM

Quote from: Convertcuda on December 08, 2018, 06:39:04 PM
Thank you for taking the time to take pictures. What type of exhaust are you going to put on car?

Ken

You're welcome, I enjoy sharing. So many folks have helped me and I hope to help someone.

Sent from my iPhone using Tapatalk Pro

Chryco Psycho · December 08, 2018, 08:11:41 PM

Love the progress , every :ohyeah:thing looks great !!

GoodysGotaCuda · December 08, 2018, 08:23:44 PM

Quote from: 71Cuda on December 08, 2018, 05:47:48 PM
Quote from: GoodysGotaCuda on December 08, 2018, 05:42:06 PM
Quote from: 71Cuda on August 07, 2018, 07:57:58 PM
Some

Sent from my iPhone using Tapatalk Pro

Aren't all Wilwood calipers 3/8" NPT? There's no flare inside of the caliper for your tubing flare to seal on and the tube nut threads are straight, not tapered.

Sorry, but unless these are different than my Wilwoods, that's not going to seal...

Sent from my iPhone using Tapatalk
Each caliper has a npt to flare fitting. We are good

Sent from my iPhone using Tapatalk Pro

Good deal

YellowThumper · December 09, 2018, 08:19:04 PM

Fyi.
NPT (tapered) locks the the threads together as they engage.
NPS (straight) requires mechanical seal. Flair, inverted flair or shoulder with gasket or orings.

71Cuda · December 10, 2018, 07:01:14 AM

Quote from: YellowThumper on December 09, 2018, 08:19:04 PM
Fyi.
NPT (tapered) locks the the threads together as they engage.
NPS (straight) requires mechanical seal. Flair, inverted flair or shoulder with gasket or orings.

Thank you very much. This is great info.

Sent from my iPhone using Tapatalk Pro

71Cuda · December 10, 2018, 08:38:42 PM

She is sitting on all four now. I'll adjust the final ride later. It's good to see Chiquita on the ground to get an idea how she will sit and what I need to adjust.

Sent from my iPhone using Tapatalk Pro

1971 Dodge Challenger Convertible Pro-Touring Hellcat 6.2L 376 V8 Manual 6-SPD Started by MasonDaniel7 on Cars For Sale or Wanted	4 Replies 782 Views	Last post: May 05, 2021, 11:06:04 AM by IRON MAN
Charger Hellcat vs. Mustang GT500 ( Hellcat Fail! ) Started by 700 AKN on General Topics	7 Replies 908 Views	Last post: May 06, 2020, 10:31:07 AM by HP2
1970 AAR Cuda, Hellcat swap Started by LoStHeMi on Cars For Sale or Wanted	15 Replies 1089 Views	Last post: May 09, 2024, 12:38:57 PM by anlauto
1970 CUDA BARRACUDA HELLCAT DRIVETRAIN Started by MasonDaniel7 on E-Body stuff found on Ebay, Craigslist or anywhere else	1 Replies 745 Views	Last post: January 07, 2020, 03:40:38 AM by anlauto
1971 Plymouth CUDA Hardtop/Coupe HEMI CUDA Tribute Started by MasonDaniel7 on Cars For Sale or Wanted	3 Replies 818 Views	Last post: July 21, 2021, 07:33:57 PM by cuda hunter