70 Challenger SE

[anlauto]

It should work with those calipers mounted on the back like that, but you'll just have a heck of a time routing the flex hose.

[Timbbuc2]

I've seen people ruin the upper control arms by pressing the ball joint out when it's a threaded situation.     Maybe someone pressed an old one out and that's why the new ones didn't fit?  But sounds like you got a set to screw in so maybe that's not it and they just sent you the wrong size?

But when I installed the ball joint it would not tighten up, too loose. Maybe they gave me the wrong part.

I think they sent the incorrect ball joints, I screwed the others in and it was fine. And BTW, I learned of the screw ball joints  here. 

[Timbbuc2]

It should work with those calipers mounted on the back like that, but you'll just have a heck of a time routing the flex hose.

I will check when i get home, now that I will have more time And I will post better pictures

[Timbbuc2]

Heater/ AC box installed, I am missing the front cover that connects the dash vents, anyone have a drawing or picture of one.

[Cuda Cody]

Is it #6?     Just sent that to Alan.  I can look to see if I have another, but not sure if that is what you need?  

[Timbbuc2]

Yep thats it. I have #2 Sure hope someone has one, thanks @Cuda Cody

[Cuda Cody]

I didn't see another one in my pile of parts, but I think I a long AC vent piece.      I think it's the AC tube piece that goes up the defrost.

[Timbbuc2]

I think I have everything ie defrost, vents tube just missing the one you had, Anyone have one?

[Timbbuc2]

Who makes the correct heater cut-off valve. Got one from Y1 and its no where close, and all they had.

[usraptor]

I don't know that they have them but try 521Restorations and/or Hoover auto parts.  They both have a lot of reproduction parts.

[headejm]

Who makes the correct heater cut-off valve. Got one from Y1 and its no where close, and all they had.

@Timbbuc2  I just bought one of these on eBay. Looks just like the 1970 version only lots cheaper.

http://www.ebay.com/itm/331998865269?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[71GranCoupe]

Who makes the correct heater cut-off valve. Got one from Y1 and its no where close, and all they had.

@Timbbuc2  I just bought one of these on eBay. Looks just like the 1970 version only lots cheaper.

http://www.ebay.com/itm/331998865269?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

If you need the correct repo bracket, Bill Rolik has them. $50 shipped.

https://forum.e-bodies.org/parts-wanted/25/looking-for-this-ac-part/587/

http://billrolikenterprises.com/proddetail.asp?prod=3441883-P

[71GranCoupe]

This showed up in the mail today, sure looks nice and the contour to the inner fender is good.   

[Timbbuc2]

I need to get one, One good thing today, got my radiator back and it checked out great, whew didnt want to buy one of those. BUT the guy did a crappy paint job(used a brush) on it but I can fix that.
@71GranCoupe where did you get the bracket?

[71GranCoupe]

Got them from Bill Rolik, $40 + 10 for the ride. Fits like a glove.


http://billrolikenterprises.com/proddetail.asp?prod=3441883-P