74 Challenger Canadian Restoration

[daaboots]

Here's the video of us pulling it from the old Dodge Truck.

[daaboots]

I finally start to work on the panel gaps. I have the doors and trunk finished up. Next up is the front grill. So far so good!

[daaboots]

Panel gap video, part 1 

[daaboots]

Panel gap video part 2. I also relocated the front bumper in order to remove the ugly plastic gap filler. Hope you enjoy 

[Brads70]

Is this what your looking for?


https://www.rosevillemoparts.com/product/bumper-end-filler-seals-1970-71-dodge-challenger/

https://www.rosevillemoparts.com/product/bumper-end-filler-seals-71-72-challenger/

[daaboots]

Next video is up! With the help from Mike at OntarioProBlast, we cleaned the rust up on all the old original metal. Then it was a coat of rust encapsulator, metal prep, and finally some primer!

[jimynick]

It IS looking good, but check with your thumb nail and a small scraper how the adhesion is before you hammer another coat on. I used the same primer and had adhesion issues that req'd stripping the car -again. It might have been my method or the material and I'm not trying to jinx you. Just see how it's holding before you spend more money.