window pinch weld black out

[mopar jack]

I know the pinch weld black out works well with black trim but what about white or red interior? I'm restoring my 71 road runner with a tan interior and orange paint. Any photos out there for this combo?

[Mrbill426]

I wonder about application too; where exactly.

[anlauto]

I think he means windshield...I say YES to all colour combinations 

[Mrbill426]

@anlauto  yes and I am wondering for sure where the blackout is applied.  Right now mine is about 4 inches up the post from the lower corners.

I think he means windshield...I say YES to all colour combinations 

[Mrbill426]

As it is now.
Sorry did not mean to hijack a thread 

[anlauto]

Yup that looks good 

[Mrbill426]

@anlauto  Cool; probably not 4 inches but cool 
I read or heard somewhere that is was supposed to go all the way up but that made no sense since isn't it all hidden under molding anyway?

Yup that looks good 

[anlauto]

I like to go down the sides rather than up...Sometimes there's an annoying gap on the sides of the dash, especially with reproduction pads.

[Mrbill426]

I will look at that today; might do it too..   

I like to go down the sides rather than up...Sometimes there's an annoying gap on the sides of the dash, especially with reproduction pads.

[mopar jack]

Did my barracuda 25 years ago and did not black out the lower channel or A pillar and the trim does not cover all of it.

[Burdar]

No blackout there on my 73.  There was so much windshield adhesive applied in that area that you couldn't see any body color.  The A-pillar trim was glued in with that stuff...from the factory.

[anlauto]

Did my barracuda 25 years ago and did not black out the lower channel or A pillar and the trim does not cover all of it.

Exactly

[headejm]

I would follow Chrysler's drawing. I took the blackout all the way up the A pillar per this drawing. My car is FC7.

https://www.e-bodies.org/Resources/Engineering_Illustrations/Black_Out_Sill_Pillar.pdf

[Mrbill426]

That's interesting... interesting that the shaded area of the pillar in the drawing is on the outboard edge and not windshield edge. 

I would follow Chrysler's drawing. I took the blackout all the way up the A pillar per this drawing. My car is FC7.

https://www.e-bodies.org/Resources/Engineering_Illustrations/Black_Out_Sill_Pillar.pdf

[anlauto]

I know that area in the above drawing, on the outside like that is done on convertibles