Main Menu

What did you do with your ebody/Mopar today?

Started by Brads70, March 21, 2017, 03:19:50 PM

Previous topic Next topic

0 Members and 33 Guests are viewing this topic.

Crash520

So I haven't been able to do a start up vid yet but attached is a very brief driving vid, I'm trying to figure out what the loud chirping is on acceleration! The EFI gurus have come up empty handed, I did put a larger alternator on it at the same time that is making a bit of a squeaking noise internally at idle so I might put the old one back on briefly to test it
https://youtu.be/m8e4oCvsd-U
Greg
Brisbane
Australia

Crash520

Ok so the chirping bird is fixed!!!!! It was the Alternator!!! A new Tuff Stuff unit, the bearings are fantastic, it's some internal noise :dunno: I put the old 55A alt back on it and no noises
Greg
Brisbane
Australia

GoodysGotaCuda

Picked up some alignment tools. This set will run caster/camber/toe.
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs


Brads70

Quote from: GoodysGotaCuda on January 01, 2018, 04:45:00 AM
Picked up some alignment tools. This set will run caster/camber/toe.

Nice. I use something similar ! ( Longacre version)

JH27N0B

Well not today, but last week, I dragged my dash pad off to Fed Ex to ship off to be redone.
Hopefully it gets delivered OK.  :fingerscrossed:
Other than approving a big charge on my credit card for the work, that's probably the last E body chore I'll be doing for some time.  We've gotten into a brutally cold weather pattern here and the cruising season seems like a long long time off.  Hopefully my pad gets done and back in time to not delay my getting the car out and enjoying it right away when the weather warms!
If I get ambitious I suppose I should see about getting my clock fixed so it shows the correct time more than twice a day when I get the dash put back together.  :banana:

GoodysGotaCuda

#665
Quote from: Brads70 on January 01, 2018, 06:57:23 AM
Quote from: GoodysGotaCuda on January 01, 2018, 04:45:00 AM
Picked up some alignment tools. This set will run caster/camber/toe.

Nice. I use something similar ! ( Longacre version)


Longacre makes really nice stuff. This is on the low end, cost wise, but looks like it'll do. I like having the toe plates around. [$200]


Sent from my iPhone using Tapatalk
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs

dodj

"There is nothing your government can give you that it hasn't already taken from you in the first place" -Winston Churchill


303 Mopar

Scheduled a video shoot over the weekend and it was 12 degrees for the morning start.  They did two videos, one on my Cuda and one on my buddies '73 TA 455, gorgeous car!

YellowThumper

 :bradsthumb:

Quote from: Crash520 on December 31, 2017, 11:32:06 PM
Ok so the chirping bird is fixed!!!!! It was the Alternator!!! A new Tuff Stuff unit, the bearings are fantastic, it's some internal noise :dunno: I put the old 55A alt back on it and no noises
Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.

GoodysGotaCuda

Found an old picture from when I was able to drive this 'Cuda...



1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs

Brads70

Quote from: GoodysGotaCuda on January 02, 2018, 04:57:06 PM
Found an old picture from when I was able to drive this 'Cuda...

There ya go, you need one of those, " Go Cuda Go" !  :Stirring: :D


benlavigne

Quote from: GoodysGotaCuda on January 02, 2018, 04:57:06 PM
Found an old picture from when I was able to drive this 'Cuda...

If both are real, that's a 1-of12 Hemicuda convertible next to a 1-of-8 69 Trans Am convertible!

Ben

73440


GoodysGotaCuda

Quote from: benlavigne on January 02, 2018, 05:42:29 PM
Quote from: GoodysGotaCuda on January 02, 2018, 04:57:06 PM
Found an old picture from when I was able to drive this 'Cuda...

If both are real, that's a 1-of12 Hemicuda convertible next to a 1-of-8 69 Trans Am convertible!

Ben

...they're real.
1972 Barracuda - 5.7L Hemi/T56 Magnum
2020 RAM 1500 - 5.7L

My Wheel and Tire Specs

benlavigne

Quote from: GoodysGotaCuda on January 02, 2018, 06:15:37 PM
Quote from: benlavigne on January 02, 2018, 05:42:29 PM
Quote from: GoodysGotaCuda on January 02, 2018, 04:57:06 PM
Found an old picture from when I was able to drive this 'Cuda...

If both are real, that's a 1-of12 Hemicuda convertible next to a 1-of-8 69 Trans Am convertible!

Ben


...they're real.

Haha!

Ben