Motor Mount Information

[7212Mopar]

Thank You for taking time to provide feedback to Mancini. You represent a few of us I think. I was too lazy myself and was focusing getting the car back together. The metal thickness is also thinner than the stock mounts.

[anlauto]

Yea it would be interesting to hear what Mancini says...likely point the finger at some out-sourced company....be sure to tell them pictures are posted on the internet 

[Scooter]

Yea it would be interesting to hear what Mancini says...likely point the finger at some out-sourced company....be sure to tell them pictures are posted on the internet 

I did not get a reply... I sent along photos as well IIRC.

They just set up the refund.

[Mrbill426]

@Scooter @anlauto ... PM sent.

[anlauto]

Thank you, it will be neat to see if anything becomes of it 

[Mrbill426]

They seem to be interested in the issue so let's hope so.
Here are comparison sight pictures of my original (the dirty one) and the Mancini Magmount for the B & E bodies.

Thank you, it will be neat to see if anything becomes of it 

[Mrbill426]

*** Update... Per Fedex tracking  Mancini Racing received my returned engine mounts this morning, and I just received a credit notice from my bank for the full purchase price incl shipping. so kudos to them. 
Now hopefully they will fix the problem.  A couple comparison photos of the Magmount vs the stock aftermarket mount on the K-frame.

[anlauto]

Good on them