Another Dana 60 question?

[750-h2]

As I mentioned in an earlier post I am in the process of detailing the Dana 60 in my 1970 V code challenger. The car has the A32 option which means the rear end has 4:10 gears and 10 inch drum brakes. I believe the DANA's had a three number code stamped with paint on the rear of the right hand axle tube. I believe but not sure that the #'s on mine should be 644? Can anyone confirm? Also not sure if they used white or yellow paint?  I would also like to know if the oil plug on the cover should be left natural or was it painted black? Thanks!

[Cuda Cody]

Pretty sure the plug was painted with the rear end.

The Dana should have come with a white with red letter decal.  I think you want 3432081.  I make up decals for mine, but you can buy them from ESC:

http://www.ecsautomotive.com/productdesc.php?co=c&id=14

[Cuda Cody]

There was also a yellow ink stamp too.  Should be the last 3 numbers of the code.

[750-h2]

Cody thanks for the quick reply!  I do I have the decal band that goes on the left axle tube.  Should there not be 3 number code stamped with paint on the right axle tube?

[anlauto]

There was also a yellow ink stamp too.  Should be the last 3 numbers of the code.

Hey, that's cool...I've never seen that on an E Body dana before

[750-h2]

Sorry Cody but I was typing when you posted that pic. So the yellow painted number on mine should be 081. Perfect and THANKS!

[Cuda Cody]

I have some of the Dana stamp artwork too if anyone needs them.  I did not load them on the site because I didn't do all of them.