70 Challenger SE

[Slotts]

So the blue from the low fuel relay plugs onto the gauge instead of the black 5 v wire?. In other  words two blue plug on the gauge? correct? And that is good information to know that you service the low fuel switch.

Yes, here is a picture from the FSM.

Jim

[Timbbuc2]

So the blue from the low fuel relay plugs onto the gauge instead of the black 5 v wire?. In other  words two blue plug on the gauge? correct? And that is good information to know that you service the low fuel switch.

Yes, here is a picture from the FSM.

Jim

Which book do you have, mine dont have that page

[Timbbuc2]

Just bought this NOS , it sure looks better than the old one

[DAYLEY/CHALLENGER]

Good looking shifter.  Mine has the ball and button.

[Timbbuc2]

BOOM

[Cuda Cody]

Looks good!!!!  Before you get much further you might want to paint the blackout around the window openings.   

[RUNCHARGER]

That's looking nice! It's hard not to work 24 hours a day on them at this point. Sure beats grinding and sanding!

[Roadman]

             Lookin good.            

[Timbbuc2]

Looks good!!!!  Before you get much further you might want to paint the blackout around the window openings.   

All around the window openings?

[Timbbuc2]

That's looking nice! It's hard not to work 24 hours a day on them at this point. Sure beats grinding and sanding!

You got that right, Dash took awhile making sure it was correct and I got the radio in that I got from @anlauto . BUT I need the lower trim that goes below the 8 Track.

[Cuda Cody]

Yes, the area around the windows gets blacked out so you do not see body color behind the glass.

https://www.e-bodies.org/Resources/Engineering_Illustrations/Black_Out_Sill_Pillar.pdf

All around the window openings?

[303 Mopar]

That's looking nice! It's hard not to work 24 hours a day on them at this point. Sure beats grinding and sanding!

BUT I need the lower trim that goes below the 8 Track.

@ec_co has one for sale....

[Timbbuc2]

That's looking nice! It's hard not to work 24 hours a day on them at this point. Sure beats grinding and sanding!

BUT I need the lower trim that goes below the 8 Track.

@ec_co has one for sale....

Thanks PM sent

[ec_co]

the one I have listed is for '70 Barracuda/Cuda only (to be correct). it would probably be fine/fit any Barracuda '70-74, but don't think it would fit any Challenger e-body.

[Timbbuc2]

Going through some of the parts that came with my car and I found the trim that goes down the door. Did they come with that or it is a add on. It the trim with rubber to protect the door.  Also Buffing my bright work, looking really good. @Cuda Cody I painted the trim inside the windshield (A pillow),thanks for the tip.