Tanks Inc. Fuel tanks for fuel injection -Product review-

[Brads70]

Wow, super fast shipping! I just ordered some extra gaskets on Wednesday and it was sitting at my door when I got home today! (Friday) Not used to that quick delivery here in Canada! 

[ToxicWolf]

The tank we got from Summit is THE Tanks Inc. tank. Summit justs sells it with the pump and stuff included.

[Roadman]

   Just ordered this access door , so we will be cutting an opening in the trunk floor for access. Will post measurements for the cut next week.  Thanks @Brads70  for sending info on this part.  http://www.tanksinc.com/index.cfm/page/ptype=product/product_id=544/category_id=167/mode=prod/prd544.htm

[ToxicWolf]

Hi Brad,

Mark started cutting for the addition of the door in the trunk floor today.  I took some pictures.  That spare tire part is in the way. 

The last picture is a cutout the size the door will be.

[Brads70]

Thanks, I figured it was in the way.

[GoodysGotaCuda]

Picked up a JakeFab tophat, I'll acquire an Aeromotive pump for my Tanks tank here soon.

[70chall440]

 

[ToxicWolf]

The access door came in so Roadman is putting it in.

[70chall440]

Damn... why didn't I think of that... 

Where did you get the access door?

[Brads70]

Damn... why didn't I think of that... 

Where did you get the access door?

I have one here too, yet to install it. My trunk floor needs to be replaced at some point so cutting it up now for this doesn't bother me. I might wince a little if it was really nice....

http://www.tanksinc.com/index.cfm/page/ptype=product/product_id=544/category_id=167/mode=prod/prd544.htm

[Brads70]

The access door came in so Roadman is putting it in.

Looks great, post up some pictures when you get the tank installed. 
I figured I would use panel bond stuff on mine?  I guess pop rivets would work too?

[Roadman]

The access door came in so Roadman is putting it in.

Looks great, post up some pictures when you get the tank installed. 
I figured I would use panel bond stuff on mine?  I guess pop rivets would work too?

Going to put the tank in tomorrow so we will post pics. The opening has to be slightly left of center based on the way the pump is mounted in the tank. We test mounted the tank 3 times before final cutting. It will be tight but the pump or sending unit will be able to be removed .

[70chall440]

Where did you source the access door?

[Roadman]

Where did you source the access door?

                           Tanks Inc.    http://www.tanksinc.com/index.cfm/page/ptype=product/product_id=544/category_id=167/mode=prod/prd544.htm

[70chall440]

Thanks.