Tanks Inc. Fuel tanks for fuel injection -Product review-

[ToxicWolf]

Todays pictures of the TanksInc install are below:

1. hoses installed on tank
2. holes cut and grommets placed for the hoses
3. tank installed
4. door over tank

[soundcontrol]

That seems like a very good idea. I get the same tank waiting. Can just imagine having a problem with the pump or sending unit and having to drop the whole tank.....

[70chall440]

That seems like a very good idea. I get the same tank waiting. Can just imagine having a problem with the pump or sending unit and having to drop the whole tank.....

Yes, yes I can... been there done that.. My tank leaked or more correctly sprayed fuel, had to drop the tank 3 times in all to get it sorted. The trap door would have helped but not fixed my issue I don't think. Either way, it is on my list of things to get and install.

[ToxicWolf]

All finished. No leaks.  When you start the pump with the trunk open, you can hear a light hum. When you start the engine, all you hear is the Hemi Orchestra playing its music.  Couldn't be happier. 

Thank you Roadman. 

[Roadman]

      It was my pleasure .                 

[Roadman]

The access door came in so Roadman is putting it in.

Looks great, post up some pictures when you get the tank installed. 
I figured I would use panel bond stuff on mine?  I guess pop rivets would work too?

                     I installed the access door today, used 3M doubled sided tape. Strong stuff, plus it sealed the outer perimeter nicely.  The top of the tank is so close to trunk floor I didn't want to use screws or rivits.

[Brads70]

I went to install the stainless trapdoor I got awhile back from Tanks Inc. which will require me to cut part of the spare tire bracket off. I moved the stud to the other location and test fitted the tire in that other location and I don't think that will work for me as it puts the spare at a weird angle and it moves/rocks no matter how tight I get the big wing nut?
Anyone else run into this issue?

[A.Gramz]

Could u make a wedge for under it?

[Brads70]

Could u make a wedge for under it?

I thought about that but what a PITA

[ToxicWolf]

I went to install the stainless trapdoor I got awhile back from Tanks Inc. which will require me to cut part of the spare tire bracket off. I moved the stud to the other location and test fitted the tire in that other location and I don't think that will work for me as it puts the spare at a weird angle and it moves/rocks no matter how tight I get the big wing nut?
Anyone else run into this issue?

Take a look at the pictures we put up on page 3.  Tire went right back where it was.

[Brads70]

I went to install the stainless trapdoor I got awhile back from Tanks Inc. which will require me to cut part of the spare tire bracket off. I moved the stud to the other location and test fitted the tire in that other location and I don't think that will work for me as it puts the spare at a weird angle and it moves/rocks no matter how tight I get the big wing nut?
Anyone else run into this issue?

Take a look at the pictures we put up on page 3.  Tire went right back where it was.

I tried that but my spare mounts in the lower position, in the upper position it rocks. Maybe it the spare I'm using? Its a Ford Lincoln space saver aluminum.  Like Gramz said I could make a wedge. When I started this it started snowing so I guess that's what frustrated me and I went back inside! 

[ToxicWolf]

That could be it.  It have the little mini spare back there.   

[1 Wild R/T]

On a convertible you position the jack hook under the front edge of the spare to level it out... Might try that on yours....

[GoodysGotaCuda]

Tanks Inc tank, JakeFab puck, Aeromotive Stealth 340lph pump, marine style sending unit.

[Brads70]

Looks nice! First thing that jumped out at me is.... that clear line , is it compatible with fuel so it won't break down?