Main Menu

HEADLINER BOW COLOUR CHART

Started by anlauto, February 12, 2017, 07:23:49 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

anlauto

HEADLINER BOW COLOUR CHART


1971 Plymouth Barracuda

                    FRONT

red----------------------------orange

red----------------------------orange

red----------------------------dark blue

red----------------------------pink

red----------------------------gray


1970 Dodge Challenger

                    FRONT

red----------------------------orange

red----------------------------orange

red----------------------------purple

tan----------------------------pink

tan----------------------------light green



I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Brads70

school me on what this means? Do the headliner bows have colored ends?  :notsure:

Cuda Cody

Great info!!!   :clapping:  Are all the red / orange bows the same for Cuda's and Challengers?  And when did they change to 4 bows?


71GranCoupe

 :popcorn:
Quote from: Brads70 on February 12, 2017, 07:46:38 PM
school me on what this means? Do the headliner bows have colored ends?  :notsure:

6bblgt

here's the headliner out of my '70 R/T - 702-SPD  :pokeeye: and their COLORS

cataclysm80

Neat!
I always left mine in the original headliner and then moved them to the same position on the new headliner when it was installation time.
Nice to know it can be sorted out if someone mixes them all up.

soundcontrol

My -73 shell has nothing up there. Is there any other hardware needed than the bows and the headliner? I see a few screwed brackets, are those for the bows?


anlauto

Quote from: cataclysm80 on February 12, 2017, 08:47:57 PM
Neat!
I always left mine in the original headliner and then moved them to the same position on the new headliner when it was installation time.
Nice to know it can be sorted out if someone mixes them all up.

I do the same. I just had this chart from somewhere and thought it would be a good guide line :alan2cents:

In your yellow 73, the rods go in one of the "three tranglated holes" on each side.
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Stein



anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


challenger6pak

Quote from: soundcontrol on February 13, 2017, 03:16:56 AM
My -73 shell has nothing up there. Is there any other hardware needed than the bows and the headliner? I see a few screwed brackets, are those for the bows?
The brackets have plastic covers that go over them for the seat belts.

Cuda Cody

Photos of the green bow cups and the 2 little wire hooks that hold the rear bows in place.

cataclysm80

Quote from: Cuda Cody on February 27, 2017, 06:56:05 PM
Photos of the green bow cups and the 2 little wire hooks that hold the rear bows in place.

I have pics that look a lot like that.   When I first saw them, I thought "I don't remember posting those pics yet".   :)

jt4406

 :twothumbsup:
Good stuff right there!!!!!!

jt


:veryexcited:
"Yeah, it's hopped up to over 160........"