70 Challenger SE

[Roadman]

               https://www.ebay.com/itm/Mopar-Power-Brake-Vacuum-Fitting-Port-Intake-Manifold-AC-Air-Grabber-GTX-Cuda/231847853912?fits=Make%3ADodge&hash=item35fb357f58:g:qjsAAOSwpDdVDk~P&vxp=mtr

[Roadman]

    @MoparDave  has them same price less your discount.   

[1 Wild R/T]

Personally I'd be scrounging, they are still around... But if easy is more important than cheap... Here ya go....

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xmopar+vacuum+fitting.TRS0&_nkw=mopar+vacuum+fitting&_sacat=0

[Timbbuc2]

Thanks for the info, I will get one ordered

[Timbbuc2]

Is there a drawing somewhere with the correct color code vacuum lines for a ac heater box. Opps i forgot to install when I had the box out.

[larry4406]

Regarding the shaker cable location with AC, I know shakers didn't come from the factory with AC but is there a problem using the "factory" cable location?  Where is the factory location?

I have a 71 barracuda vert with factory AC which will have a shaker with AC (dormant project).

[Timbbuc2]

Regarding the shaker cable location with AC, I know shakers didn't come from the factory with AC but is there a problem using the "factory" cable location?  Where is the factory location?

I have a 71 barracuda vert with factory AC which will have a shaker with AC (dormant project).

https://forum.e-bodies.org/reference-material/18/e-body-hole-locations-firewall-door-interior-ect/303/90
Maybe I copied the link correctly

[Timbbuc2]

Does anyone have pictures of a alternator bracket and  water pump tension pulley. This is a 383 ac car.
Thanks

[Timbbuc2]

https://youtu.be/uH0EMHkByjA
This is how I cleaned my grill . This is a brush with abrasives embedded into the bristles.  And also used Mothers buffing compound. I had to run it in reverse also to get the left side corners. This was time consuming . But turned out well.

[Brads70]

https://youtu.be/uH0EMHkByjA
This is how I cleaned my grill . This is a brush with abrasives embedded into the bristles.  And also used Mothers buffing compound. I had to run it in reverse also to get the left side corners. This was time consuming . But turned out well.

good idea!

[1 Wild R/T]

Does anyone have pictures of a alternator bracket and  water pump tension pulley. This is a 383 ac car.
Thanks

These help?

[Timbbuc2]

Does anyone have pictures of a alternator bracket and  water pump tension pulley. This is a 383 ac car.
Thanks

These help?

That's what I need thanks

[headejm]

1970 Challenger RT/SE with 383 and AC. Hope they help. 

[Timbbuc2]

1970 Challenger RT/SE with 383 and AC. Hope they help. 

Thanks @headejm that is about as clear as it gets.

[Timbbuc2]

Well a 2 week vacation is coming to end. So you ask"Did you crank your car" well actually life happens again. Better half decided she wanted new kitchen cabinets. After what I have spent on my car ,no way I could say no. So I had to prep the kitchen,such as remove wallpaper and paint. I did manage to get one full day. But what the heck, going to have a new kitchen. And also I had my grand daughter for 5 days. That was great