project phantom

Cuda70-74 · November 15, 2019, 11:45:15 AM

Quote from: JpRngr on November 14, 2019, 09:59:14 PM
So, are you using 4 identical bulbs with halo's or are you just using 2 halo's and 2 others? I've been trying to figure out UPIwhat I want for my high beams to go with my LED outters on my Challenger. It's funny turning on the high beams and they're a dim yellow, compared with the bright white of the low beams. I think im going to go with all 4 halo housing but im only going to wire 2 halos up tho.

Corey

Cuda70-74 · November 21, 2019, 02:17:15 PM

Little update. I installed my headlight but i had to modify the headlight retaining ring. I had to uninstall it and then use some expoxy where the spot welds were. I also got my kwik wiring harness(306$)and sound deadener. The American auto wire harness was way too expensive almost a (1000$ )

JS29 · November 21, 2019, 02:34:45 PM

@Cuda70-74 Were the hinges done by mopar-leo?

Cuda70-74 · November 21, 2019, 02:45:15 PM

Quote from: JS29 on November 21, 2019, 02:34:45 PM
@Cuda70-74 Were the hinges done by mopar-leo?

U notice and yes they were. Big thanks to Mopar-Leo 194$ total.

JS29 · November 22, 2019, 05:27:01 AM

Quote from: Cuda70-74 on November 21, 2019, 02:45:15 PM
Quote from: JS29 on November 21, 2019, 02:34:45 PM
@Cuda70-74 Were the hinges done by mopar-leo?
U notice and yes they were. Big thanks to Mopar-Leo 194$ total.

Cuda70-74 · November 22, 2019, 09:48:15 PM

Today I installed noico sound deadener and started laying out my wiring harness out.

Cuda70-74 · November 23, 2019, 11:16:28 PM

Today I made a bracket so I can mount my kwik wire fuse panel. I used the exitsing hole and drilled a hole thru the bracket I made. Im also wondering if anybody has a quater glass track slider mines broke apart and fell down into the quarter panel. Does anybody know what size gauges are in the dash?

Cuda70-74 · November 25, 2019, 10:11:09 PM

Thanks to Diyhemi.com im starting to make my own stand alone harness for gen 3 hemi swap. Its looks like a mess but im still labeling the wiring harness

Cuda70-74 · December 04, 2019, 09:09:27 PM

Quick question im rebuilding my heater box. Was just wondering does the fan need to be replaced. It seem to be in good condition??

JS29 · December 05, 2019, 06:13:49 AM

Why replace something that ant broke!

Cuda70-74 · December 05, 2019, 10:35:31 AM

Quote from: JS29 on December 05, 2019, 06:13:49 AM
Why replace something that ant broke!

Thats usually my motto.

Cuda70-74 · December 06, 2019, 04:57:02 PM

My friend gave me a free 70 cuda driver door he had laying around for years. Since mines was hit in the reinforced it was pretty hard to repair. I also started rebuilding my heater blower box and waiting on my heater core. I also wanted to keep the factory markings so masked it off.

Cuda70-74 · December 15, 2019, 08:36:17 PM

Finally installed my heater box that I rebuilt and found the correct longer wheel studs

Cuda Cody · December 15, 2019, 08:55:19 PM

Making good progress!

Cuda70-74 · December 16, 2019, 08:01:03 AM

Quote from: Cuda Cody on December 15, 2019, 08:55:19 PM
Making good progress!

Thanks

Phantom Cuda carcass (Graveyard Carz) Started by Cuda Cody on Cuda & Challenger General Discussion (ROSEVILLE MOPARTS)	20 Replies 8718 Views	Last post: July 11, 2017, 06:30:11 PM by anlauto
My new project Started by xx88man on Cuda & Challenger General Discussion (ROSEVILLE MOPARTS)	55 Replies 4942 Views	Last post: April 03, 2017, 05:26:40 PM by Blake@diyhemi.com
My AAR project Started by 6Pack70 on Your Restoration project (ROSEVILLE MOPARTS)	207 Replies 16291 Views	Last post: January 14, 2020, 08:57:33 AM by JS29
new here with a big project Started by cuda-jay on New Members Introductions (ROSEVILLE MOPARTS)	31 Replies 2759 Views	Last post: August 28, 2019, 08:59:37 PM by nsmall
New project for A.G.A.R. Started by anlauto on Your Restoration project (ROSEVILLE MOPARTS)	30 Replies 2839 Views	Last post: November 08, 2018, 07:57:57 AM by Spikedog08