Main Menu

70 Go Mango Challenger

Started by cudaragtop, April 21, 2018, 08:06:12 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

cudaragtop

Quote from: anlauto on April 30, 2018, 03:50:47 AM
Man that's a lot of work...why wouldn't you just take the entire dash out of the car first ?
Good question Alan... Pretty sure I won't be doing it that way again.   :bricks:   :Thud:

- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8

cudaragtop

Guess I'll be headed to Radio Shack. Or other since most of the Radio Shacks around here have disapeered...

Quote from: Husk Challenger on April 30, 2018, 12:43:22 AM
Isn't it the "light buzzer" diode??

Quote from: PlumCrazyRTSE on April 30, 2018, 01:46:12 AM
Yep, looks like a diode and the gray band indicates the cathode side.



Thanks for the info. Found this on here.

https://forum.e-bodies.org/reference-material/18/rare-1970-headlight-warning-diode/177/



Quote from: cataclysm80 on January 18, 2017, 08:33:14 PM
Quote from: Cuda Cody on January 09, 2017, 02:12:49 PM
How hard do you think it would be to make one?  :clueless:


It can be done.    :D



- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8

RUNCHARGER

Nice work and great photos for anyone that will want to do the same. Cudas to Cody for such a great forum for these cars.
Sheldon


cudaragtop

Quote from: RUNCHARGER on April 30, 2018, 08:04:26 AM
Nice work and great photos for anyone that will want to do the same. Cudas to Cody for such a great forum for these cars.

Easily the Best Mopar Forum on the Net.  :perfect10:  


- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8

cudaragtop

Definitely not paying $50 for one of these.


- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8

cudaragtop

Just looked on Amazon.
Quantity of (1), (5) or (100) 4004 Diodes all are priced $5.00 and change.


- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8

YellowThumper

You have scored such a great starting point and even making it better.
Agree on Tuff wheel. Had to change mine out also.

Mike.
Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.


usraptor

Great work on restoring all those dash pieces, especially the cracks.  Just a hint at something I tried and that worked well on some cracks in some of my plastic pieces.  After fixing the crack, put a piece of drywall tape over the crack and then coat that with 5 minute epoxy.  Works sort of like fiberglass matting but much easier and adds extra strength to the crack in case it flexes.

cudaragtop

#53
Interior is pretty much back together.
What a pain in the arse to get the console back together and installed with everything not wanting to line up.
Calling it Good 'nuff!
No Radio... had an old pioneer cassete deck in the hole but it's not going back in. Don't have the stock radio.
Will put something in there modern with decent speakers, amp and subwoofer.  Kick panels were already cut. Package tray has cutouts for 6x9 or simmilar. The front center speaker was shreded. I have an addapter for a pair of small speakers to fit in its place. Mobile AC guy coming tomarrow to recover the R134A from the system so I can finish taking it apart. The car goes in for Engine Bay and trunk paint on Monday 6/4
Will also get the under side of the hoop stripped and painted. While the engine is out, I will clean it up and paint it too.








Paint over undercoating ove paint... WTH??? Oh well turns out it's not rotted like I suspected.


- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8

303 Mopar

Quote from: cudaragtop on May 20, 2018, 10:25:52 PM
Interior is pretty much back together.

Can't see your pics,,,,, :rubeyes:

1 Wild R/T

Quote from: 303 Mopar on May 21, 2018, 05:01:24 AM
Quote from: cudaragtop on May 20, 2018, 10:25:52 PM
Interior is pretty much back together.

Can't see your pics,,,,, :rubeyes:

Don't know why? Looks good to me....


JS29


YellowThumper

Life is to be viewed thru the windshield. Not rear view mirror.
You are the only one in charge of your destiny.

Mike.

cudaragtop

I can see them but...  :thinking:
Interior Back Together
Engine Bay getting disasembled.
Under hood goopy undercoat on top of original panit and then painted over.


- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8

cudaragtop

Here is a link to my Go Mango Challenger Photo Album.
All the pictures I have posted and more here. More than anyone really wants to see...
https://photos.app.goo.gl/oS5Wxj4M0CNBFZga2

- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8