project phantom

[Cuda70-74]

You should be able to.  Do yours not fit? 

Quick question can you use your stock oil pan screws on the milodon pan 31000 oil pan?

It does fit. I just saw that milodon had there own bolts for sale. Thought there might be some fitment issues

[soundcontrol]

Quick question can you use your stock oil pan screws on the milodon pan 31000 oil pan?

I think the length is different, I was recommended to change them.

Edit: Just read about it again, yes, the factory ones are too long, they can bottom out in some holes and not seal the Milodon pan properly.
https://moparskunkwerks.wordpress.com/2012/12/06/fitting-the-pan/

[303 Mopar]

We used #85025 short bolts for the pan as stock are too long.

[Cuda70-74]

Thanks for the responses

[Cuda70-74]

Got my rims and tires in today

[Chryco Psycho]

Different look , Congrats 

[Katfish]

Nice!
I run Sumitomo's too, about the best bang for the buck tires I've found.

[A.Gramz]

Got a quick question. What most of you guys/gals use to cover up the lower quarter panel part that goes over the rocker panel? I was thinking bondo

It looks like u used skins by this picture.  There is something like 3/4" short. if u look at this whole quarter pic you will see what I mean.  I had to add to my skins there it will make that gap almost flush with rocket

[soundcontrol]

Got a quick question. What most of you guys/gals use to cover up the lower quarter panel part that goes over the rocker panel? I was thinking bondo

It looks like u used skins by this picture.  There is something like 3/4" short. if u look at this whole quarter pic you will see what I mean.  I had to add to my skins there it will make that gap almost flush with rocket

Seems to be a difference in brands of skins, the first picture, my Goodmark skin, is short. The second is my AMD skin, it has the extra length there.

[Cuda70-74]

Different look , Congrats 

Thanks. Just my opinion mopars didnt offer alot of appealing wheels

[Cuda70-74]

Got a quick question. What most of you guys/gals use to cover up the lower quarter panel part that goes over the rocker panel? I was thinking bondo

It looks like u used skins by this picture.  There is something like 3/4" short. if u look at this whole quarter pic you will see what I mean.  I had to add to my skins there it will make that gap almost flush with rocket

Seems to be a difference in brands of skins, the first picture, my Goodmark skin, is short. The second is my AMD skin, it has the extra length there.

Yes i did use a goodmark skin

[Cuda70-74]

Hey all well yall made me do it lol. Im just going to replace the roof on the cuda and just do it right. Im hating old school muscle cars because i might be getting a 68 charger smh that will be 3 project smh.

[Cuda70-74]

Well today was somewhat warm 40 degrees. So I decided to take the roof which wasn't a hard time just time consuming due to all the spot wells.

[Topcat]

You made a wise decision replacing the roof.

[Cuda70-74]

You made a wise decision replacing the roof.

yes it and you guys were right