project phantom

[Cuda70-74]

Quick question has anybody on here installed this type of hydraulic clutch conversion??
https://www.ebay.com/itm/McLEOD-HYDRAULIC-CLUTCH-CONVERSION-MoPAR-A833-4-SPEED-23-SPLINE/130698288385?pageci=ebea8025-532b-447a-becf-6be9cb3d2254

[Cuda70-74]

I got my pistol grip shifter in today and didnt know they we're made out of gold. I got it for a pretty good deal 133 shipped.My question is my pistols grip handle only has one hole in the bottom of the handle compared to others I have seen some with 2 holes is that normal??

[RUNCHARGER]

The one hole photoed is a 70 style, later ones have two holes and bolt onto the shifter box rather than slide in like the 1 hole does.

[Cuda70-74]

The one hole photoed is a 70 style, later ones have two holes and bolt onto the shifter box rather than slide in like the 1 hole does.

Thanks. It will mount up to the shifter with no problems also??

[Mopsquad]

Just read this thread (mostly complete) for the first time.  It's like a good book, hard to put down. 

[Cuda70-74]

Just read this thread (mostly complete) for the first time.  It's like a good book, hard to put down.

Thanks appreciate it

[Cuda70-74]

Quick question. Im going to be using A a833 tranny in my gen 3 swap. I did read u can use any small block bellhousing. Does that include truck bellhousing?? I was just wondering if this would fit.https://www.ebay.com/itm/Dodge-Truck-Mopar-Bell-Housing-Small-Block-P435-Trans-318-360-3893728/202868064245

[soundcontrol]

Quick question. Im going to be using A a833 tranny in my gen 3 swap. I did read u can use any small block bellhousing. Does that include truck bellhousing?? I was just wondering if this would fit.https://www.ebay.com/itm/Dodge-Truck-Mopar-Bell-Housing-Small-Block-P435-Trans-318-360-3893728/202868064245

Not 100% sure, different bolt patterns, but the inner bolt pattern might be the same as my inner. Here is the bell housing I got for my 73 project, 5.7 Hemi with a a833.
I don't have a flywheel or the clutch yet. Thinking about going hydraulic.

[soundcontrol]

Probably not, looking at my tranny, its seems to use the 2 top holes.

[Cuda70-74]

Quick question. Im going to be using A a833 tranny in my gen 3 swap. I did read u can use any small block bellhousing. Does that include truck bellhousing?? I was just wondering if this would fit.https://www.ebay.com/itm/Dodge-Truck-Mopar-Bell-Housing-Small-Block-P435-Trans-318-360-3893728/202868064245

Not 100% sure, different bolt patterns, but the inner bolt pattern might be the same as my inner. Here is the bell housing I got for my 73 project, 5.7 Hemi with a a833.
I don't have a flywheel or the clutch yet. Thinking about going hydraulic.

Thanks. Do u have a part number off that bellhousing. Im also going with a hydraulic clutch setup. Im waiting on my a833 tranny

[soundcontrol]

Quick question. Im going to be using A a833 tranny in my gen 3 swap. I did read u can use any small block bellhousing. Does that include truck bellhousing?? I was just wondering if this would fit.https://www.ebay.com/itm/Dodge-Truck-Mopar-Bell-Housing-Small-Block-P435-Trans-318-360-3893728/202868064245

Not 100% sure, different bolt patterns, but the inner bolt pattern might be the same as my inner. Here is the bell housing I got for my 73 project, 5.7 Hemi with a a833.
I don't have a flywheel or the clutch yet. Thinking about going hydraulic.

Thanks. Do u have a part number off that bellhousing. Im also going with a hydraulic clutch setup. Im waiting on my a833 tranny

Only numbers on it is the ones you see on the picture, maybe the part No is the one with the Chrysler star, its sandblasted so I cant read it at all.

[Cuda70-74]

Quick question. Im going to be using A a833 tranny in my gen 3 swap. I did read u can use any small block bellhousing. Does that include truck bellhousing?? I was just wondering if this would fit.https://www.ebay.com/itm/Dodge-Truck-Mopar-Bell-Housing-Small-Block-P435-Trans-318-360-3893728/202868064245

Not 100% sure, different bolt patterns, but the inner bolt pattern might be the same as my inner. Here is the bell housing I got for my 73 project, 5.7 Hemi with a a833.
I don't have a flywheel or the clutch yet. Thinking about going hydraulic.

Thanks. Do u have a part number off that bellhousing. Im also going with a hydraulic clutch setup. Im waiting on my a833 tranny

Only numbers on it is the ones you see on the picture, maybe the part No is the one with the Chrysler star, its sandblasted so I cant read it at all.

ok thanks again

[Cuda70-74]

Just got in my Speedway Universal Gen III 5.7 Hemi Engine Weld-In Motor Mounts. Im just wondering has anybody install them before??

[Katfish]

I bought Schumacher conversion mounts for when I finally get around to my swap.
Didn't know SpeedWay had those, interested in how they work for you.

[Cuda70-74]

I bought Schumacher conversion mounts for when I finally get around to my swap.
Didn't know SpeedWay had those, interested in how they work for you.

Yeah i think they just released them this year. Their the weld in type.