Main Menu

project phantom

Started by Cuda70-74, July 05, 2017, 11:51:20 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Cuda Cody

I will check and see if I have some photos of that location when I get home...

Cuda70-74

Quote from: Cuda Cody on May 21, 2018, 09:18:21 AM
I will check and see if I have some photos of that location when I get home...
ok cool thanks
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

Cuda70-74

I got my rear valance bolt kit and need some help on finding out where they go. Is there any manual online I can use.
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger


Cuda70-74

Little update on the cuda. I got the driver side quarter panel fully welded in and the corner brace. Things are coming along well  :banana:
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

Cuda Cody


Cuda70-74

Thanks. Any bondo  recommendation?
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

JS29

Evercoat rage gold, Good stuff.  :wrenching:


Cuda70-74

1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

Cuda70-74

Hey guys I got a quick question how do u remove the drip rail? I'm currently working on a patch panel for the driver side on corner section of the roof
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

soundcontrol

#204
I'm looking at loose drip rails for my 73 Challenger now, there is screw holes all over and the screws are proberly covered by the rubber seal on yours.

* Added a picture of the driprail without the rubber seal.

Cuda70-74

Quote from: soundcontrol on June 06, 2018, 12:14:11 PM
I'm looking at loose drip rails for my 73 Challenger now, there is screw holes all over and the screws are proberly covered by the rubber seal on yours.
Thanks I'll check it out when I get home
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger


CudaMoparRay

It's been a heck of a restoration project with some great welding skills it is seeing the light at the end of the tunnel.  :lookatthat:  :clapping:

Cuda70-74

Quote from: CudaMoparRay on June 06, 2018, 01:02:38 PM
It's been a heck of a restoration project with some great welding skills it is seeing the light at the end of the tunnel.  :lookatthat:  :clapping:
Thanks it's been a while but I'm getting back in the groove of things again.
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

Cuda70-74

@soundscontrol Thanks for the pic that is it. I got the trim off today. I also made me some frame roller if that's what u want to call it. It just bolts to the frame where the bumpers bolt too.
1969 mustang
1974 cuda turnt into a 71 cuda
1968 charger

soundcontrol

Cool, you getting things done! I'm getting back to my project soon.